LAN parties never died
Original Xbox System Link on Android: LAN Play and XLink Kai Setup
Quick answer
System link was the original Xbox's LAN multiplayer: consoles connected by a network cable played together. HapticX supports it in Settings › Network › System link. Choose LAN to play with consoles and emulators on the same network (or on a VPN like ZeroTier or Tailscale), or XLink Kai to play over the internet through an XLink Kai engine running on a PC or Raspberry Pi.
Key takeaways
- Only games with system link support can do this; split-screen games just work on one phone with several controllers.
- LAN mode: type the IP addresses of the other consoles or emulators, separated by commas, with an optional port.
- Internet without Kai: put everyone on the same ZeroTier or Tailscale network and use LAN mode with their VPN addresses.
- XLink Kai mode: run the Kai engine on a PC or Raspberry Pi, enter its IP in HapticX, and pick the game's arena on the engine's web page.
- Network changes apply at the next game start, and every player must run the same game version.

What is system link?
Before Xbox Live took over, the original Xbox had system link: connect two consoles with an Ethernet cable, or several through a network switch, and supported games would find each other for local multiplayer. It was the engine of Halo LAN parties, and many games kept it even after Xbox Live launched.
Because system link speaks plain network packets, it can be carried far beyond one room. Emulators can join it, and tools like XLink Kai tunnel it across the internet, which is how original Xbox online play survives today.
Some well-known system link games: Halo: Combat Evolved, Halo 2, MechAssault, Crimson Skies: High Road to Revenge, Project Gotham Racing 2, Star Wars Battlefront II, TimeSplitters 2 and Unreal Championship. Check a game's back cover or options menu for "System Link."
The three modes in HapticX
Open Settings, find the Network section and tap System link:
| Mode | Use it for | What you enter |
|---|---|---|
| Off (no cable) | Single-player and split-screen. The default. | Nothing |
| LAN: consoles on this network | Phones, emulators or modded consoles on the same Wi-Fi, another subnet, or a shared VPN | Other consoles: their IP addresses |
| XLink Kai: over the Internet | Playing with anyone in the XLink Kai community | XLink Kai engine: the IP of the PC or Pi running it |
Changes apply the next time you start a game.
Set up LAN play (same network)
- Put every device on the same Wi-Fi network. 5 GHz Wi-Fi gives lower latency than 2.4 GHz.
- Find each device's local IP address. On Android it's under Settings › About phone › Status, or in your Wi-Fi network's details; it usually looks like
192.168.1.23. - In HapticX on each phone, set System link to LAN: consoles on this network.
- Under Other consoles, enter the other devices' IP addresses, separated by commas. Add
:portonly if you need a specific one, for example192.168.1.23, 192.168.1.40:3075. - Start the same game on every device and pick System Link from its multiplayer menu.
Play over the internet with a VPN (ZeroTier or Tailscale)
Friends far away? A virtual LAN makes their phone look like it's on your network:
- Everyone installs ZeroTier or Tailscale and joins the same network.
- Each person notes their device's address on that VPN (for example
10.147.17.5on ZeroTier). - In HapticX, use LAN mode and enter everyone else's VPN addresses under Other consoles.
This works well for small private groups. For public lobbies, use XLink Kai.
Set up XLink Kai
XLink Kai is a long-running free service, run by Team XLink, that tunnels system link traffic over the internet and organizes it into per-game "arenas" where players meet. It works through a small program called the Kai engine, which runs on a computer on your network rather than on the phone itself.
- Create a free account on the XLink Kai website and install the Kai engine on a Windows, macOS or Linux PC, or a Raspberry Pi, on the same network as your phone.
- Start the engine and note the computer's local IP address, for example
192.168.1.20. - In HapticX, set System link to XLink Kai: over the Internet and enter that address under XLink Kai engine.
- Open the Kai engine's web page in a browser, sign in and go to the arena for your game.
- Start the game in HapticX and choose System Link. Players in the same arena show up as if they were on your LAN.
Tips for a smooth session
- Same game, same version. Every player needs the same game and region; mismatched versions often can't see each other.
- Keep the phone cool. A hot phone throttles and drops frames, which can cause lag or desyncs in network play.
- Use 5 GHz Wi-Fi or Ethernet (via a USB-C adapter) for the lowest latency.
- Can't see each other? Double-check the addresses, make sure no device is on a guest Wi-Fi network that isolates clients, and restart the game after changing settings.
Frequently asked questions
Can I play original Xbox games online on Android?
Yes, for games with system link. Xbox Live for the original Xbox shut down in 2010, but HapticX can tunnel system link over the internet through XLink Kai, or connect to friends over a VPN like ZeroTier or Tailscale.
Does XLink Kai run on Android?
The Kai engine runs on a PC or Raspberry Pi on your network, not on the phone. HapticX connects to it: enter the engine's IP address in Settings, Network, System link, XLink Kai engine.
Can HapticX system link with a real Xbox or xemu?
System link is a standard network protocol, so HapticX can join consoles and emulators on the same network or XLink Kai arena, as long as everyone runs the same game version.
Is split-screen supported?
Split-screen games run on one phone like they did on one console. Connect up to four controllers and assign them to players 1 to 4 in Settings, Controls, Physical controllers.
Why can't my friends see my game?
Check that system link mode and addresses are set on every device, that everyone has the same game version, and that no one is on a guest Wi-Fi network that blocks devices from seeing each other. Settings apply at the next game start.
